Phase II Enterprise

OK, this is the thing I’ve been working on, for those who didn’t get it already. I’ve always been intrigued by Star Trek: Phase II, the second attempt at a Star Trek TV series by Paramount that was doomed before it really got into production. Of course, the pilot episode became Star Trek: The Motion Picture, and many of the sets were used on the movies and even TNG, and some of the characters and stories were revisited on that show as well, but one wonders what would have become of Star Trek had that series gone through, as opposed to becoming a movie. We’ll never know because it didn’t happen, and everything worked out OK. We had the movies with the original cast, followed by TNG, DS9, Voyager, more movies and Enterprise. All told, a lot of good Trek, some of which likely wouldn’t have happened if Phase II had happened instead of TMP. Of course, the current state of Star Trek is sad, but at least we have hours upon hours of great shows and movies.

One thing I’ve always liked from Phase II was the model work being done at Brick Price Movie Miniatures, particularly the Enterprise model being constructed by Don Loos. Unfortunately, the model wasn’t high enough quality for the motion picture work as it was being built for television, so it couldn’t be used. Still, I love looking at Matt Jefferies’ sleek redesign for the ship, and at the 75% completed model that was being built. They were also working on a space dock that was significantly different than the one designed by Andrew Probert for the movie.

Anyway, I’ve built this ship before, but it’s been many years. As before, I’m using Jefferies’ updated drawings, cleaned up and made available by David Shaw. The drawings aren’t complete, but they give a complete enough view of what he had in mind for the Enterprise’s refit. There are also a few existing pics from the build in the Phase II book, which I of course have a copy of. In fact, I’m re-reading it while working on this. But, what I don’t have as far as references is where artistic license comes in. My goal is to do something between TOS and TMP, like maybe an intermediate design. Anyway, this is what I have so far:

PhaseII_WIP01

Continue reading

Return to CGI, Pt. 2

If anyone calling them self a Trekkie sees these images and doesn’t know what ship I’m doing, I’m going to have to ask you to turn in your Trekkie card. 😉

Windowshot_2017-11-13_17:14:53

Windowshot_2017-11-13_17:23:14

The rear end of the engineering section is based on the one from TOS. I did it as close to the schematic drawings and the handful of pics of the incomplete model as I could, with a bit of embellishment of my own thrown in. That’s been the most time consuming part of this build so far.